1991 Italdesign M12 vs. 2010 Nissan Altima
To start off, 2010 Nissan Altima is newer by 19 year(s). Which means there will be less support and parts availability for 1991 Italdesign M12. In addition, the cost of maintenance, including insurance, on 1991 Italdesign M12 would be higher. At 4,988 cc (12 cylinders), 1991 Italdesign M12 is equipped with a bigger engine. In terms of performance, 1991 Italdesign M12 (300 HP) has 125 more horse power than 2010 Nissan Altima. (175 HP). In normal driving conditions, 1991 Italdesign M12 should accelerate faster than 2010 Nissan Altima.
Because 1991 Italdesign M12 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1991 Italdesign M12. However, in wet, icy, snow, or gravel driving conditions, 2010 Nissan Altima, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Italdesign M12 (450 Nm) has 206 more torque (in Nm) than 2010 Nissan Altima. (244 Nm). This means 1991 Italdesign M12 will have an easier job in driving up hills or pulling heavy equipment than 2010 Nissan Altima.
Compare all specifications:
| 1991 Italdesign M12 | 2010 Nissan Altima | |
| Make | Italdesign | Nissan |
| Model | M12 | Altima |
| Year Released | 1991 | 2010 |
| Body Type | Coupe | Sedan |
| Engine Position | Middle | Front |
| Engine Size | 4988 cc | 2500 cc |
| Engine Cylinders | 12 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 300 HP | 175 HP |
| Torque | 450 Nm | 244 Nm |
| Drive Type | Rear | Front |
| Transmission Type | Manual | CVT |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Length | 4380 mm | 4595 mm |
| Vehicle Width | 1990 mm | 1796 mm |
| Vehicle Height | 1120 mm | 1420 mm |
| Wheelbase Size | 2600 mm | 2675 mm |
