1991 Italdesign Nazca vs. 1969 Subaru FF-1

To start off, 1991 Italdesign Nazca is newer by 22 year(s). Which means there will be less support and parts availability for 1969 Subaru FF-1. In addition, the cost of maintenance, including insurance, on 1969 Subaru FF-1 would be higher. At 4,988 cc (12 cylinders), 1991 Italdesign Nazca is equipped with a bigger engine. In terms of performance, 1991 Italdesign Nazca (350 HP @ 5200 RPM) has 303 more horse power than 1969 Subaru FF-1. (47 HP @ 6000 RPM). In normal driving conditions, 1991 Italdesign Nazca should accelerate faster than 1969 Subaru FF-1.

Because 1991 Italdesign Nazca is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1991 Italdesign Nazca. However, in wet, icy, snow, or gravel driving conditions, 1969 Subaru FF-1, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Italdesign Nazca (470 Nm @ 4000 RPM) has 393 more torque (in Nm) than 1969 Subaru FF-1. (77 Nm @ 3200 RPM). This means 1991 Italdesign Nazca will have an easier job in driving up hills or pulling heavy equipment than 1969 Subaru FF-1.

Compare all specifications:

1991 Italdesign Nazca 1969 Subaru FF-1
Make Italdesign Subaru
Model Nazca FF-1
Year Released 1991 1969
Engine Position Middle Front
Engine Size 4988 cc 977 cc
Engine Cylinders 12 cylinders 4 cylinders
Engine Type V in-line
Horse Power 350 HP 47 HP
Engine RPM 5200 RPM 6000 RPM
Torque 470 Nm 77 Nm
Torque RPM 4000 RPM 3200 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 2 doors
Vehicle Length 4400 mm 3940 mm
Vehicle Width 2090 mm 1490 mm
Vehicle Height 1120 mm 1400 mm
Wheelbase Size 2600 mm 2430 mm