1991 Italdesign Nazca vs. 2008 Rover 75
To start off, 2008 Rover 75 is newer by 17 year(s). Which means there will be less support and parts availability for 1991 Italdesign Nazca. In addition, the cost of maintenance, including insurance, on 1991 Italdesign Nazca would be higher. At 4,988 cc (12 cylinders), 1991 Italdesign Nazca is equipped with a bigger engine.
Because 1991 Italdesign Nazca is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1991 Italdesign Nazca. However, in wet, icy, snow, or gravel driving conditions, 2008 Rover 75, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Italdesign Nazca (470 Nm @ 4000 RPM) has 255 more torque (in Nm) than 2008 Rover 75. (215 Nm @ 2100 RPM). This means 1991 Italdesign Nazca will have an easier job in driving up hills or pulling heavy equipment than 2008 Rover 75.
Compare all specifications:
| 1991 Italdesign Nazca | 2008 Rover 75 | |
| Make | Italdesign | Rover |
| Model | Nazca | 75 |
| Year Released | 1991 | 2008 |
| Engine Position | Middle | Front |
| Engine Size | 4988 cc | 1794 cc |
| Engine Cylinders | 12 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 350 HP | 0 HP |
| Torque | 470 Nm | 215 Nm |
| Torque RPM | 4000 RPM | 2100 RPM |
| Fuel Type | Gasoline | Gasoline |
| Top Speed | 297 km/hour | 213 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Length | 4400 mm | 4000 mm |
| Vehicle Height | 1120 mm | 1420 mm |
| Wheelbase Size | 2600 mm | 2750 mm |
