1991 Lancia Delta vs. 1980 Subaru Rex

To start off, 1991 Lancia Delta is newer by 11 year(s). Which means there will be less support and parts availability for 1980 Subaru Rex. In addition, the cost of maintenance, including insurance, on 1980 Subaru Rex would be higher. At 1,995 cc (4 cylinders), 1991 Lancia Delta is equipped with a bigger engine. In terms of performance, 1991 Lancia Delta (208 HP @ 5750 RPM) has 179 more horse power than 1980 Subaru Rex. (29 HP @ 6200 RPM). In normal driving conditions, 1991 Lancia Delta should accelerate faster than 1980 Subaru Rex. With that said, vehicle weight also plays an important factor in acceleration. 1991 Lancia Delta weights approximately 765 kg more than 1980 Subaru Rex. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1991 Lancia Delta is four wheel drive (4WD), it will have significant more traction and grip than 1980 Subaru Rex. In wet, icy, snow, or gravel driving conditions, 1991 Lancia Delta will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Lancia Delta (310 Nm @ 3500 RPM) has 267 more torque (in Nm) than 1980 Subaru Rex. (43 Nm @ 3500 RPM). This means 1991 Lancia Delta will have an easier job in driving up hills or pulling heavy equipment than 1980 Subaru Rex.

Compare all specifications:

1991 Lancia Delta 1980 Subaru Rex
Make Lancia Subaru
Model Delta Rex
Year Released 1991 1980
Engine Position Front Rear
Engine Size 1995 cc 544 cc
Engine Cylinders 4 cylinders 2 cylinders
Engine Type in-line in-line
Horse Power 208 HP 29 HP
Engine RPM 5750 RPM 6200 RPM
Torque 310 Nm 43 Nm
Torque RPM 3500 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Manual Manual
Vehicle Weight 1300 kg 535 kg
Vehicle Length 3910 mm 3000 mm
Vehicle Width 1780 mm 1300 mm
Vehicle Height 1380 mm 1290 mm
Wheelbase Size 2490 mm 1930 mm