1991 Mercedes-Benz 600 vs. 1966 Triumph GT6

To start off, 1991 Mercedes-Benz 600 is newer by 25 year(s). Which means there will be less support and parts availability for 1966 Triumph GT6. In addition, the cost of maintenance, including insurance, on 1966 Triumph GT6 would be higher. At 5,987 cc (12 cylinders), 1991 Mercedes-Benz 600 is equipped with a bigger engine. In terms of performance, 1991 Mercedes-Benz 600 (408 HP @ 5200 RPM) has 313 more horse power than 1966 Triumph GT6. (95 HP @ 5000 RPM). In normal driving conditions, 1991 Mercedes-Benz 600 should accelerate faster than 1966 Triumph GT6. With that said, vehicle weight also plays an important factor in acceleration. 1991 Mercedes-Benz 600 weights approximately 1366 kg more than 1966 Triumph GT6. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Mercedes-Benz 600 (580 Nm @ 3800 RPM) has 422 more torque (in Nm) than 1966 Triumph GT6. (158 Nm @ 3000 RPM). This means 1991 Mercedes-Benz 600 will have an easier job in driving up hills or pulling heavy equipment than 1966 Triumph GT6. 1991 Mercedes-Benz 600 has automatic transmission and 1966 Triumph GT6 has manual transmission. 1966 Triumph GT6 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1991 Mercedes-Benz 600 will be easier to drive especially in heavy traffic.

Compare all specifications:

1991 Mercedes-Benz 600 1966 Triumph GT6
Make Mercedes-Benz Triumph
Model 600 GT6
Year Released 1991 1966
Engine Position Front Front
Engine Size 5987 cc 1996 cc
Engine Cylinders 12 cylinders 6 cylinders
Engine Type V in-line
Horse Power 408 HP 95 HP
Engine RPM 5200 RPM 5000 RPM
Torque 580 Nm 158 Nm
Torque RPM 3800 RPM 3000 RPM
Engine Bore Size 89.1 mm 74.7 mm
Engine Stroke Size 80.2 mm 76 mm
Engine Compression Ratio 10.0:1 9.5:1
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 2230 kg 864 kg
Vehicle Length 5220 mm 3690 mm
Vehicle Width 1890 mm 1450 mm
Vehicle Height 1500 mm 1200 mm
Wheelbase Size 3150 mm 2110 mm
Fuel Tank Capacity 100 L 44 L