1991 Oldsmobile Cutlass vs. 2008 Opel Signum
To start off, 2008 Opel Signum is newer by 17 year(s). Which means there will be less support and parts availability for 1991 Oldsmobile Cutlass. In addition, the cost of maintenance, including insurance, on 1991 Oldsmobile Cutlass would be higher. At 3,351 cc (6 cylinders), 1991 Oldsmobile Cutlass is equipped with a bigger engine. In terms of performance, 1991 Oldsmobile Cutlass (197 HP @ 5000 RPM) has 44 more horse power than 2008 Opel Signum. (153 HP @ 5600 RPM). In normal driving conditions, 1991 Oldsmobile Cutlass should accelerate faster than 2008 Opel Signum. With that said, vehicle weight also plays an important factor in acceleration. 2008 Opel Signum weights approximately 25 kg more than 1991 Oldsmobile Cutlass.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Oldsmobile Cutlass (291 Nm @ 4400 RPM) has 71 more torque (in Nm) than 2008 Opel Signum. (220 Nm @ 3800 RPM). This means 1991 Oldsmobile Cutlass will have an easier job in driving up hills or pulling heavy equipment than 2008 Opel Signum.
Compare all specifications:
1991 Oldsmobile Cutlass | 2008 Opel Signum | |
Make | Oldsmobile | Opel |
Model | Cutlass | Signum |
Year Released | 1991 | 2008 |
Engine Position | Front | Front |
Engine Size | 3351 cc | 2197 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 197 HP | 153 HP |
Engine RPM | 5000 RPM | 5600 RPM |
Torque | 291 Nm | 220 Nm |
Torque RPM | 4400 RPM | 3800 RPM |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1510 kg | 1535 kg |
Vehicle Length | 4930 mm | 4640 mm |
Vehicle Width | 1810 mm | 1800 mm |
Vehicle Height | 1350 mm | 1470 mm |
Wheelbase Size | 2740 mm | 2840 mm |