1992 Alfa Romeo 155 vs. 2003 Holden UTE
To start off, 2003 Holden UTE is newer by 11 year(s). Which means there will be less support and parts availability for 1992 Alfa Romeo 155. In addition, the cost of maintenance, including insurance, on 1992 Alfa Romeo 155 would be higher. At 3,791 cc (6 cylinders), 2003 Holden UTE is equipped with a bigger engine. In terms of performance, 2003 Holden UTE (204 HP @ 5200 RPM) has 84 more horse power than 1992 Alfa Romeo 155. (120 HP @ 6300 RPM) In normal driving conditions, 2003 Holden UTE should accelerate faster than 1992 Alfa Romeo 155.
Because 2003 Holden UTE is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2003 Holden UTE. However, in wet, icy, snow, or gravel driving conditions, 1992 Alfa Romeo 155, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Holden UTE (305 Nm @ 3600 RPM) has 153 more torque (in Nm) than 1992 Alfa Romeo 155. (152 Nm @ 5000 RPM). This means 2003 Holden UTE will have an easier job in driving up hills or pulling heavy equipment than 1992 Alfa Romeo 155.
Compare all specifications:
1992 Alfa Romeo 155 | 2003 Holden UTE | |
Make | Alfa Romeo | Holden |
Model | 155 | UTE |
Year Released | 1992 | 2003 |
Body Type | Sedan | Pickup |
Engine Position | Front | Front |
Engine Size | 1598 cc | 3791 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 120 HP | 204 HP |
Engine RPM | 6300 RPM | 5200 RPM |
Torque | 152 Nm | 305 Nm |
Torque RPM | 5000 RPM | 3600 RPM |
Drive Type | Front | Rear |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Length | 4450 mm | 5060 mm |
Vehicle Width | 1740 mm | 1850 mm |
Vehicle Height | 1450 mm | 1490 mm |
Wheelbase Size | 2550 mm | 2950 mm |