1992 Alpina B6 vs. 2010 Audi S3

To start off, 2010 Audi S3 is newer by 18 year(s). Which means there will be less support and parts availability for 1992 Alpina B6. In addition, the cost of maintenance, including insurance, on 1992 Alpina B6 would be higher. At 2,752 cc (6 cylinders), 1992 Alpina B6 is equipped with a bigger engine. In terms of performance, 2010 Audi S3 (252 HP @ 6000 RPM) has 14 more horse power than 1992 Alpina B6. (238 HP @ 5900 RPM) In normal driving conditions, 2010 Audi S3 should accelerate faster than 1992 Alpina B6. With that said, vehicle weight also plays an important factor in acceleration. 2010 Audi S3 weights approximately 130 kg more than 1992 Alpina B6. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Audi S3 is four wheel drive (4WD), it will have significant more traction and grip than 1992 Alpina B6. In wet, icy, snow, or gravel driving conditions, 2010 Audi S3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Audi S3 (331 Nm @ 2400 RPM) has 38 more torque (in Nm) than 1992 Alpina B6. (293 Nm @ 4700 RPM). This means 2010 Audi S3 will have an easier job in driving up hills or pulling heavy equipment than 1992 Alpina B6.

Compare all specifications:

1992 Alpina B6 2010 Audi S3
Make Alpina Audi
Model B6 S3
Year Released 1992 2010
Engine Position Front Front
Engine Size 2752 cc 1984 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 238 HP 252 HP
Engine RPM 5900 RPM 6000 RPM
Torque 293 Nm 331 Nm
Torque RPM 4700 RPM 2400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Vehicle Weight 1325 kg 1455 kg
Vehicle Length 4440 mm 4220 mm
Vehicle Width 1710 mm 1410 mm
Vehicle Height 1400 mm 1770 mm
Wheelbase Size 2710 mm 2580 mm