1992 Alpina B6 vs. 2011 Holden Captiva

To start off, 2011 Holden Captiva is newer by 19 year(s). Which means there will be less support and parts availability for 1992 Alpina B6. In addition, the cost of maintenance, including insurance, on 1992 Alpina B6 would be higher. At 2,752 cc (6 cylinders), 1992 Alpina B6 is equipped with a bigger engine. In terms of performance, 1992 Alpina B6 (238 HP @ 5900 RPM) has 100 more horse power than 2011 Holden Captiva. (138 HP @ 5200 RPM). In normal driving conditions, 1992 Alpina B6 should accelerate faster than 2011 Holden Captiva. With that said, vehicle weight also plays an important factor in acceleration. 2011 Holden Captiva weights approximately 480 kg more than 1992 Alpina B6.

Because 2011 Holden Captiva is four wheel drive (4WD), it will have significant more traction and grip than 1992 Alpina B6. In wet, icy, snow, or gravel driving conditions, 2011 Holden Captiva will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Alpina B6 (293 Nm @ 4700 RPM) has 73 more torque (in Nm) than 2011 Holden Captiva. (220 Nm @ 2400 RPM). This means 1992 Alpina B6 will have an easier job in driving up hills or pulling heavy equipment than 2011 Holden Captiva.

Compare all specifications:

1992 Alpina B6 2011 Holden Captiva
Make Alpina Holden
Model B6 Captiva
Year Released 1992 2011
Engine Position Front Front
Engine Size 2752 cc 2404 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 238 HP 138 HP
Engine RPM 5900 RPM 5200 RPM
Torque 293 Nm 220 Nm
Torque RPM 4700 RPM 2400 RPM
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear 4WD
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1325 kg 1805 kg
Vehicle Length 4440 mm 4580 mm
Vehicle Width 1710 mm 1860 mm
Vehicle Height 1400 mm 1710 mm
Wheelbase Size 2710 mm 2710 mm