1992 Alpine A 610 vs. 1992 Ford Falcon
To start off, both 1992 Alpine A 610 and 1992 Ford Falcon were released in the same year (1992). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 3,948 cc (6 cylinders), 1992 Ford Falcon is equipped with a bigger engine. In terms of performance, 1992 Alpine A 610 (247 HP @ 5750 RPM) has 86 more horse power than 1992 Ford Falcon. (161 HP @ 4250 RPM). In normal driving conditions, 1992 Alpine A 610 should accelerate faster than 1992 Ford Falcon. With that said, vehicle weight also plays an important factor in acceleration. 1992 Ford Falcon weights approximately 31 kg more than 1992 Alpine A 610.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Alpine A 610 (357 Nm @ 2900 RPM) has 46 more torque (in Nm) than 1992 Ford Falcon. (311 Nm @ 3250 RPM). This means 1992 Alpine A 610 will have an easier job in driving up hills or pulling heavy equipment than 1992 Ford Falcon.
Compare all specifications:
| 1992 Alpine A 610 | 1992 Ford Falcon | |
| Make | Alpine | Ford |
| Model | A 610 | Falcon |
| Year Released | 1992 | 1992 |
| Engine Size | 2975 cc | 3948 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | V | in-line |
| Horse Power | 247 HP | 161 HP |
| Engine RPM | 5750 RPM | 4250 RPM |
| Torque | 357 Nm | 311 Nm |
| Torque RPM | 2900 RPM | 3250 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1414 kg | 1445 kg |
| Vehicle Length | 4430 mm | 4820 mm |
| Vehicle Width | 1780 mm | 1860 mm |
| Vehicle Height | 1200 mm | 1410 mm |
