1992 Alpine A 610 vs. 2008 Audi A6
To start off, 2008 Audi A6 is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Alpine A 610. In addition, the cost of maintenance, including insurance, on 1992 Alpine A 610 would be higher. At 2,975 cc (6 cylinders), 1992 Alpine A 610 is equipped with a bigger engine. In terms of performance, 1992 Alpine A 610 (247 HP @ 5750 RPM) has 16 more horse power than 2008 Audi A6. (231 HP @ 4000 RPM). In normal driving conditions, 1992 Alpine A 610 should accelerate faster than 2008 Audi A6. With that said, vehicle weight also plays an important factor in acceleration. 2008 Audi A6 weights approximately 351 kg more than 1992 Alpine A 610.
Because 2008 Audi A6 is four wheel drive (4WD), it will have significant more traction and grip than 1992 Alpine A 610. In wet, icy, snow, or gravel driving conditions, 2008 Audi A6 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Audi A6 (450 Nm @ 1400 RPM) has 93 more torque (in Nm) than 1992 Alpine A 610. (357 Nm @ 2900 RPM). This means 2008 Audi A6 will have an easier job in driving up hills or pulling heavy equipment than 1992 Alpine A 610.
Compare all specifications:
1992 Alpine A 610 | 2008 Audi A6 | |
Make | Alpine | Audi |
Model | A 610 | A6 |
Year Released | 1992 | 2008 |
Engine Size | 2975 cc | 2967 cc |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 247 HP | 231 HP |
Engine RPM | 5750 RPM | 4000 RPM |
Torque | 357 Nm | 450 Nm |
Torque RPM | 2900 RPM | 1400 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 1414 kg | 1765 kg |
Vehicle Length | 4430 mm | 4940 mm |
Vehicle Width | 1780 mm | 1860 mm |
Vehicle Height | 1200 mm | 1470 mm |