1992 Alpine A 610 vs. 2009 Honda S2000

To start off, 2009 Honda S2000 is newer by 17 year(s). Which means there will be less support and parts availability for 1992 Alpine A 610. In addition, the cost of maintenance, including insurance, on 1992 Alpine A 610 would be higher. At 2,975 cc (6 cylinders), 1992 Alpine A 610 is equipped with a bigger engine. In terms of performance, 1992 Alpine A 610 (247 HP @ 5750 RPM) has 9 more horse power than 2009 Honda S2000. (238 HP @ 8300 RPM). In normal driving conditions, 1992 Alpine A 610 should accelerate faster than 2009 Honda S2000. With that said, vehicle weight also plays an important factor in acceleration. 1992 Alpine A 610 weights approximately 164 kg more than 2009 Honda S2000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Alpine A 610 (357 Nm @ 2900 RPM) has 149 more torque (in Nm) than 2009 Honda S2000. (208 Nm @ 7500 RPM). This means 1992 Alpine A 610 will have an easier job in driving up hills or pulling heavy equipment than 2009 Honda S2000.

Compare all specifications:

1992 Alpine A 610 2009 Honda S2000
Make Alpine Honda
Model A 610 S2000
Year Released 1992 2009
Engine Size 2975 cc 1995 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 247 HP 238 HP
Engine RPM 5750 RPM 8300 RPM
Torque 357 Nm 208 Nm
Torque RPM 2900 RPM 7500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1414 kg 1250 kg
Vehicle Length 4430 mm 4140 mm
Vehicle Width 1780 mm 1760 mm
Vehicle Height 1200 mm 1280 mm