1992 Audi 100 vs. 2010 BMW 325
To start off, 2010 BMW 325 is newer by 18 year(s). Which means there will be less support and parts availability for 1992 Audi 100. In addition, the cost of maintenance, including insurance, on 1992 Audi 100 would be higher. At 4,172 cc (4 cylinders), 1992 Audi 100 is equipped with a bigger engine. In terms of performance, 1992 Audi 100 (277 HP @ 5800 RPM) has 83 more horse power than 2010 BMW 325. (194 HP @ 4000 RPM). In normal driving conditions, 1992 Audi 100 should accelerate faster than 2010 BMW 325.
Because 2010 BMW 325 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 BMW 325. However, in wet, icy, snow, or gravel driving conditions, 1992 Audi 100, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 400 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.
Compare all specifications:
1992 Audi 100 | 2010 BMW 325 | |
Make | Audi | BMW |
Model | 100 | 325 |
Year Released | 1992 | 2010 |
Engine Position | Front | Front |
Engine Size | 4172 cc | 2494 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 277 HP | 194 HP |
Engine RPM | 5800 RPM | 4000 RPM |
Torque | 400 Nm | 400 Nm |
Torque RPM | 4000 RPM | 3250 RPM |
Top Speed | 250 km/hour | 228 km/hour |
Acceleration 0-100mph | 6.2 seconds | 7.6 seconds |
Drive Type | Front | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Length | 4800 mm | 4230 mm |
Vehicle Width | 1780 mm | 1820 mm |
Vehicle Height | 1450 mm | 1440 mm |