1992 Beijing BJ 2020 vs. 1996 Mercedes-Benz C

To start off, 1996 Mercedes-Benz C is newer by 4 year(s). Which means there will be less support and parts availability for 1992 Beijing BJ 2020. In addition, the cost of maintenance, including insurance, on 1992 Beijing BJ 2020 would be higher. At 2,799 cc (6 cylinders), 1996 Mercedes-Benz C is equipped with a bigger engine. In terms of performance, 1996 Mercedes-Benz C (190 HP @ 5500 RPM) has 120 more horse power than 1992 Beijing BJ 2020. (70 HP @ 3800 RPM) In normal driving conditions, 1996 Mercedes-Benz C should accelerate faster than 1992 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 1996 Mercedes-Benz C weights approximately 500 kg more than 1992 Beijing BJ 2020. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1992 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 1996 Mercedes-Benz C. In wet, icy, snow, or gravel driving conditions, 1992 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Mercedes-Benz C (270 Nm @ 3750 RPM) has 110 more torque (in Nm) than 1992 Beijing BJ 2020. (160 Nm @ 2200 RPM). This means 1996 Mercedes-Benz C will have an easier job in driving up hills or pulling heavy equipment than 1992 Beijing BJ 2020. 1996 Mercedes-Benz C has automatic transmission and 1992 Beijing BJ 2020 has manual transmission. 1992 Beijing BJ 2020 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Mercedes-Benz C will be easier to drive especially in heavy traffic.

Compare all specifications:

1992 Beijing BJ 2020 1996 Mercedes-Benz C
Make Beijing Mercedes-Benz
Model BJ 2020 C
Year Released 1992 1996
Engine Size 2445 cc 2799 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 70 HP 190 HP
Engine RPM 3800 RPM 5500 RPM
Torque 160 Nm 270 Nm
Torque RPM 2200 RPM 3750 RPM
Drive Type 4WD Rear
Transmission Type Manual Automatic
Vehicle Weight 1550 kg 2050 kg
Vehicle Length 3870 mm 4490 mm
Vehicle Width 1760 mm 1730 mm
Vehicle Height 1880 mm 1430 mm
Wheelbase Size 2310 mm 2700 mm