1992 Beijing BJ 212 vs. 1973 Mazda RX-4
To start off, 1992 Beijing BJ 212 is newer by 19 year(s). Which means there will be less support and parts availability for 1973 Mazda RX-4. In addition, the cost of maintenance, including insurance, on 1973 Mazda RX-4 would be higher. At 2,616 cc, 1973 Mazda RX-4 is equipped with a bigger engine. In terms of performance, 1973 Mazda RX-4 (114 HP @ 6000 RPM) has 27 more horse power than 1992 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1973 Mazda RX-4 should accelerate faster than 1992 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1992 Beijing BJ 212 weights approximately 420 kg more than 1973 Mazda RX-4.
Because 1992 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1973 Mazda RX-4. In wet, icy, snow, or gravel driving conditions, 1992 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Beijing BJ 212 (181 Nm @ 2000 RPM) has 16 more torque (in Nm) than 1973 Mazda RX-4. (165 Nm @ 4000 RPM). This means 1992 Beijing BJ 212 will have an easier job in driving up hills or pulling heavy equipment than 1973 Mazda RX-4.
Compare all specifications:
1992 Beijing BJ 212 | 1973 Mazda RX-4 | |
Make | Beijing | Mazda |
Model | BJ 212 | RX-4 |
Year Released | 1992 | 1973 |
Engine Size | 2068 cc | 2616 cc |
Engine Type | in-line | dual-disk rotary |
Horse Power | 87 HP | 114 HP |
Engine RPM | 4250 RPM | 6000 RPM |
Torque | 181 Nm | 165 Nm |
Torque RPM | 2000 RPM | 4000 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Rear |
Vehicle Weight | 1530 kg | 1110 kg |
Vehicle Length | 3910 mm | 4400 mm |
Vehicle Width | 1760 mm | 1670 mm |
Vehicle Height | 1880 mm | 1390 mm |
Wheelbase Size | 2310 mm | 2520 mm |