1992 Beijing BJ 212 vs. 1996 BMW 525
To start off, 1996 BMW 525 is newer by 4 year(s). Which means there will be less support and parts availability for 1992 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1992 Beijing BJ 212 would be higher. At 2,494 cc (6 cylinders), 1996 BMW 525 is equipped with a bigger engine. In terms of performance, 1996 BMW 525 (168 HP @ 5500 RPM) has 81 more horse power than 1992 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1996 BMW 525 should accelerate faster than 1992 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1992 Beijing BJ 212 weights approximately 20 kg more than 1996 BMW 525.
Because 1992 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1996 BMW 525. In wet, icy, snow, or gravel driving conditions, 1992 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 BMW 525 (245 Nm @ 3950 RPM) has 64 more torque (in Nm) than 1992 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 1996 BMW 525 will have an easier job in driving up hills or pulling heavy equipment than 1992 Beijing BJ 212.
Compare all specifications:
1992 Beijing BJ 212 | 1996 BMW 525 | |
Make | Beijing | BMW |
Model | BJ 212 | 525 |
Year Released | 1992 | 1996 |
Engine Size | 2068 cc | 2494 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 168 HP |
Engine RPM | 4250 RPM | 5500 RPM |
Torque | 181 Nm | 245 Nm |
Torque RPM | 2000 RPM | 3950 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 1510 kg |
Vehicle Length | 3910 mm | 4810 mm |
Vehicle Width | 1760 mm | 1810 mm |
Vehicle Height | 1880 mm | 1450 mm |
Wheelbase Size | 2310 mm | 2840 mm |