1992 Beijing BJ 212 vs. 2008 Chevrolet Silverado

To start off, 2008 Chevrolet Silverado is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1992 Beijing BJ 212 would be higher. At 5,999 cc (8 cylinders), 2008 Chevrolet Silverado is equipped with a bigger engine. In terms of performance, 2008 Chevrolet Silverado (312 HP @ 4400 RPM) has 225 more horse power than 1992 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 2008 Chevrolet Silverado should accelerate faster than 1992 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chevrolet Silverado weights approximately 670 kg more than 1992 Beijing BJ 212. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chevrolet Silverado (506 Nm @ 4400 RPM) has 325 more torque (in Nm) than 1992 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 2008 Chevrolet Silverado will have an easier job in driving up hills or pulling heavy equipment than 1992 Beijing BJ 212. 2008 Chevrolet Silverado has automatic transmission and 1992 Beijing BJ 212 has manual transmission. 1992 Beijing BJ 212 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chevrolet Silverado will be easier to drive especially in heavy traffic.

Compare all specifications: