1992 Beijing BJ 212 vs. 2008 Mazda 3

To start off, 2008 Mazda 3 is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1992 Beijing BJ 212 would be higher. At 2,068 cc (4 cylinders), 1992 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, 2008 Mazda 3 (148 HP @ 6000 RPM) has 61 more horse power than 1992 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 2008 Mazda 3 should accelerate faster than 1992 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1992 Beijing BJ 212 weights approximately 220 kg more than 2008 Mazda 3.

Because 1992 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 2008 Mazda 3. In wet, icy, snow, or gravel driving conditions, 1992 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 3 (187 Nm @ 4500 RPM) has 6 more torque (in Nm) than 1992 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 2008 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1992 Beijing BJ 212.

Compare all specifications:

1992 Beijing BJ 212 2008 Mazda 3
Make Beijing Mazda
Model BJ 212 3
Year Released 1992 2008
Engine Size 2068 cc 1999 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 87 HP 148 HP
Engine RPM 4250 RPM 6000 RPM
Torque 181 Nm 187 Nm
Torque RPM 2000 RPM 4500 RPM
Fuel Type Diesel Gasoline - Premium
Drive Type 4WD Front
Transmission Type Manual Manual
Vehicle Weight 1530 kg 1310 kg
Vehicle Length 3910 mm 4430 mm
Vehicle Width 1760 mm 1760 mm
Vehicle Height 1880 mm 1470 mm
Wheelbase Size 2310 mm 2650 mm