1992 BMW 320 vs. 2000 Peugeot 406

To start off, 2000 Peugeot 406 is newer by 8 year(s). Which means there will be less support and parts availability for 1992 BMW 320. In addition, the cost of maintenance, including insurance, on 1992 BMW 320 would be higher. At 1,996 cc (4 cylinders), 2000 Peugeot 406 is equipped with a bigger engine. In terms of performance, 1992 BMW 320 (150 HP @ 5900 RPM) has 16 more horse power than 2000 Peugeot 406. (134 HP @ 5600 RPM). In normal driving conditions, 1992 BMW 320 should accelerate faster than 2000 Peugeot 406. With that said, vehicle weight also plays an important factor in acceleration. 1992 BMW 320 weights approximately 10 kg more than 2000 Peugeot 406. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1992 BMW 320 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 BMW 320. However, in wet, icy, snow, or gravel driving conditions, 2000 Peugeot 406, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 190 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles. 2000 Peugeot 406 has automatic transmission and 1992 BMW 320 has manual transmission. 1992 BMW 320 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Peugeot 406 will be easier to drive especially in heavy traffic.

Compare all specifications:

1992 BMW 320 2000 Peugeot 406
Make BMW Peugeot
Model 320 406
Year Released 1992 2000
Body Type Coupe Coupe
Engine Position Front Front
Engine Size 1990 cc 1996 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 150 HP 134 HP
Engine RPM 5900 RPM 5600 RPM
Torque 190 Nm 190 Nm
Torque RPM 4200 RPM 4100 RPM
Engine Bore Size 80 mm 85 mm
Engine Stroke Size 66 mm 88 mm
Engine Compression Ratio 11.0:1 10.8:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1380 kg 1370 kg
Vehicle Length 4440 mm 4620 mm
Vehicle Width 1800 mm 1790 mm
Vehicle Height 1400 mm 1360 mm
Wheelbase Size 2710 mm 2730 mm
Fuel Tank Capacity 65 L 70 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]