1992 BMW 320 vs. 2009 Chrysler 300

To start off, 2009 Chrysler 300 is newer by 17 year(s). Which means there will be less support and parts availability for 1992 BMW 320. In addition, the cost of maintenance, including insurance, on 1992 BMW 320 would be higher. At 5,645 cc (8 cylinders), 2009 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2009 Chrysler 300 (335 HP @ 5000 RPM) has 185 more horse power than 1992 BMW 320. (150 HP @ 5900 RPM) In normal driving conditions, 2009 Chrysler 300 should accelerate faster than 1992 BMW 320. With that said, vehicle weight also plays an important factor in acceleration. 2009 Chrysler 300 weights approximately 530 kg more than 1992 BMW 320. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1992 BMW 320 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 BMW 320. However, in wet, icy, snow, or gravel driving conditions, 2009 Chrysler 300, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Chrysler 300 (525 Nm @ 4000 RPM) has 335 more torque (in Nm) than 1992 BMW 320. (190 Nm @ 4200 RPM). This means 2009 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1992 BMW 320. 2009 Chrysler 300 has automatic transmission and 1992 BMW 320 has manual transmission. 1992 BMW 320 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Chrysler 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

1992 BMW 320 2009 Chrysler 300
Make BMW Chrysler
Model 320 300
Year Released 1992 2009
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 1990 cc 5645 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 4 valves
Horse Power 150 HP 335 HP
Engine RPM 5900 RPM 5000 RPM
Torque 190 Nm 525 Nm
Torque RPM 4200 RPM 4000 RPM
Engine Bore Size 80 mm 99.5 mm
Engine Stroke Size 66 mm 90.9 mm
Engine Compression Ratio 11.0:1 9.6:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1380 kg 1910 kg
Vehicle Length 4440 mm 5010 mm
Vehicle Width 1800 mm 1890 mm
Vehicle Height 1400 mm 1490 mm
Wheelbase Size 2710 mm 3050 mm
Fuel Tank Capacity 65 L 70 L