1992 BMW 320 vs. 2010 BMW 325

To start off, 2010 BMW 325 is newer by 18 year(s). Which means there will be less support and parts availability for 1992 BMW 320. In addition, the cost of maintenance, including insurance, on 1992 BMW 320 would be higher. At 2,494 cc (6 cylinders), 2010 BMW 325 is equipped with a bigger engine. In terms of performance, 2010 BMW 325 (194 HP @ 4000 RPM) has 44 more horse power than 1992 BMW 320. (150 HP @ 5900 RPM) In normal driving conditions, 2010 BMW 325 should accelerate faster than 1992 BMW 320.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 325 (400 Nm @ 3250 RPM) has 210 more torque (in Nm) than 1992 BMW 320. (190 Nm @ 4200 RPM). This means 2010 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 1992 BMW 320.

Compare all specifications:

1992 BMW 320 2010 BMW 325
Make BMW BMW
Model 320 325
Year Released 1992 2010
Body Type Coupe Station Wagon
Engine Position Front Front
Engine Size 1990 cc 2494 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 150 HP 194 HP
Engine RPM 5900 RPM 4000 RPM
Torque 190 Nm 400 Nm
Torque RPM 4200 RPM 3250 RPM
Engine Compression Ratio 11.0:1 17.0:1
Fuel Type Gasoline Diesel
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Length 4440 mm 4230 mm
Vehicle Width 1800 mm 1820 mm
Vehicle Height 1400 mm 1440 mm
Wheelbase Size 2710 mm 2770 mm
Fuel Tank Capacity 65 L 61 L