1992 BMW 332 vs. 2005 Chevrolet Cavalier

To start off, 2005 Chevrolet Cavalier is newer by 13 year(s). Which means there will be less support and parts availability for 1992 BMW 332. In addition, the cost of maintenance, including insurance, on 1992 BMW 332 would be higher. At 3,152 cc (6 cylinders), 1992 BMW 332 is equipped with a bigger engine. In terms of performance, 1992 BMW 332 (317 HP @ 7400 RPM) has 197 more horse power than 2005 Chevrolet Cavalier. (120 HP @ 5200 RPM). In normal driving conditions, 1992 BMW 332 should accelerate faster than 2005 Chevrolet Cavalier. With that said, vehicle weight also plays an important factor in acceleration. 1992 BMW 332 weights approximately 209 kg more than 2005 Chevrolet Cavalier. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1992 BMW 332 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 BMW 332. However, in wet, icy, snow, or gravel driving conditions, 2005 Chevrolet Cavalier, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 BMW 332 (350 Nm @ 3250 RPM) has 167 more torque (in Nm) than 2005 Chevrolet Cavalier. (183 Nm @ 3600 RPM). This means 1992 BMW 332 will have an easier job in driving up hills or pulling heavy equipment than 2005 Chevrolet Cavalier. 2005 Chevrolet Cavalier has automatic transmission and 1992 BMW 332 has manual transmission. 1992 BMW 332 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Chevrolet Cavalier will be easier to drive especially in heavy traffic.

Compare all specifications:

1992 BMW 332 2005 Chevrolet Cavalier
Make BMW Chevrolet
Model 332 Cavalier
Year Released 1992 2005
Engine Position Front Front
Engine Size 3152 cc 2190 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 317 HP 120 HP
Engine RPM 7400 RPM 5200 RPM
Torque 350 Nm 183 Nm
Torque RPM 3250 RPM 3600 RPM
Engine Bore Size 86.4 mm 89 mm
Engine Stroke Size 89.6 mm 88 mm
Engine Compression Ratio 10.5:1 9.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Vehicle Weight 1400 kg 1191 kg
Vehicle Length 4440 mm 4600 mm
Vehicle Width 1710 mm 1730 mm
Vehicle Height 1400 mm 1400 mm
Wheelbase Size 2710 mm 2570 mm