1992 BMW 332 vs. 2008 Fiat Stilo

To start off, 2008 Fiat Stilo is newer by 16 year(s). Which means there will be less support and parts availability for 1992 BMW 332. In addition, the cost of maintenance, including insurance, on 1992 BMW 332 would be higher. At 3,152 cc (6 cylinders), 1992 BMW 332 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1992 BMW 332 weights approximately 135 kg more than 2008 Fiat Stilo.

Because 1992 BMW 332 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 BMW 332. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Stilo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 BMW 332 (350 Nm @ 3250 RPM) has 129 more torque (in Nm) than 2008 Fiat Stilo. (221 Nm @ 3500 RPM). This means 1992 BMW 332 will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Stilo.

Compare all specifications:

1992 BMW 332 2008 Fiat Stilo
Make BMW Fiat
Model 332 Stilo
Year Released 1992 2008
Engine Position Front Front
Engine Size 3152 cc 2446 cc
Engine Cylinders 6 cylinders 5 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 5 valves
Horse Power 317 HP 0 HP
Torque 350 Nm 221 Nm
Torque RPM 3250 RPM 3500 RPM
Engine Bore Size 86.4 mm 83.1 mm
Engine Stroke Size 89.6 mm 90.4 mm
Engine Compression Ratio 10.5:1 10.5:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Vehicle Weight 1400 kg 1265 kg
Vehicle Length 4440 mm 4190 mm
Vehicle Width 1710 mm 1790 mm
Vehicle Height 1400 mm 1480 mm
Wheelbase Size 2710 mm 2610 mm