1992 BMW 538 vs. 2010 Fiat Siena
To start off, 2010 Fiat Siena is newer by 18 year(s). Which means there will be less support and parts availability for 1992 BMW 538. In addition, the cost of maintenance, including insurance, on 1992 BMW 538 would be higher. At 3,795 cc (6 cylinders), 1992 BMW 538 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1992 BMW 538 weights approximately 760 kg more than 2010 Fiat Siena.
Because 1992 BMW 538 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 BMW 538. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 BMW 538 (400 Nm @ 4750 RPM) has 298 more torque (in Nm) than 2010 Fiat Siena. (102 Nm @ 3250 RPM). This means 1992 BMW 538 will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Siena.
Compare all specifications:
1992 BMW 538 | 2010 Fiat Siena | |
Make | BMW | Fiat |
Model | 538 | Siena |
Year Released | 1992 | 2010 |
Body Type | Sedan | Sedan |
Engine Position | Front | Front |
Engine Size | 3795 cc | 1242 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 341 HP | 0 HP |
Torque | 400 Nm | 102 Nm |
Torque RPM | 4750 RPM | 3250 RPM |
Engine Compression Ratio | 10.5:1 | 9.1:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1830 kg | 1070 kg |
Vehicle Length | 4730 mm | 3830 mm |
Vehicle Width | 1760 mm | 1640 mm |
Vehicle Height | 1400 mm | 1440 mm |