1992 BMW M3 vs. 2010 Fiat Doblo
To start off, 2010 Fiat Doblo is newer by 18 year(s). Which means there will be less support and parts availability for 1992 BMW M3. In addition, the cost of maintenance, including insurance, on 1992 BMW M3 would be higher. At 2,990 cc (6 cylinders), 1992 BMW M3 is equipped with a bigger engine. In terms of performance, 1992 BMW M3 (282 HP @ 7000 RPM) has 213 more horse power than 2010 Fiat Doblo. (69 HP @ 4000 RPM). In normal driving conditions, 1992 BMW M3 should accelerate faster than 2010 Fiat Doblo.
Because 1992 BMW M3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 BMW M3. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Doblo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 BMW M3 (320 Nm @ 3400 RPM) has 140 more torque (in Nm) than 2010 Fiat Doblo. (180 Nm @ 1750 RPM). This means 1992 BMW M3 will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Doblo.
Compare all specifications:
| 1992 BMW M3 | 2010 Fiat Doblo | |
| Make | BMW | Fiat |
| Model | M3 | Doblo |
| Year Released | 1992 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 2990 cc | 1248 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 282 HP | 69 HP |
| Engine RPM | 7000 RPM | 4000 RPM |
| Torque | 320 Nm | 180 Nm |
| Torque RPM | 3400 RPM | 1750 RPM |
| Engine Bore Size | 86 mm | 69.6 mm |
| Engine Stroke Size | 85.8 mm | 82 mm |
| Engine Compression Ratio | 10.8:1 | 18.0:1 |
| Fuel Type | Gasoline | Diesel |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Wheelbase Size | 2710 mm | 2755 mm |
