1992 Bugatti EB 110 vs. 2010 BMW 120

To start off, 2010 BMW 120 is newer by 18 year(s). Which means there will be less support and parts availability for 1992 Bugatti EB 110. In addition, the cost of maintenance, including insurance, on 1992 Bugatti EB 110 would be higher. At 3,498 cc (12 cylinders), 1992 Bugatti EB 110 is equipped with a bigger engine. In terms of performance, 1992 Bugatti EB 110 (560 HP) has 405 more horse power than 2010 BMW 120. (155 HP). In normal driving conditions, 1992 Bugatti EB 110 should accelerate faster than 2010 BMW 120. With that said, vehicle weight also plays an important factor in acceleration. 1992 Bugatti EB 110 weights approximately 233 kg more than 2010 BMW 120. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1992 Bugatti EB 110 is four wheel drive (4WD), it will have significant more traction and grip than 2010 BMW 120. In wet, icy, snow, or gravel driving conditions, 1992 Bugatti EB 110 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Bugatti EB 110 (612 Nm) has 412 more torque (in Nm) than 2010 BMW 120. (200 Nm). This means 1992 Bugatti EB 110 will have an easier job in driving up hills or pulling heavy equipment than 2010 BMW 120. 2010 BMW 120 has automatic transmission and 1992 Bugatti EB 110 has manual transmission. 1992 Bugatti EB 110 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 BMW 120 will be easier to drive especially in heavy traffic.

Compare all specifications:

1992 Bugatti EB 110 2010 BMW 120
Make Bugatti BMW
Model EB 110 120
Year Released 1992 2010
Engine Position Middle Front
Engine Size 3498 cc 1995 cc
Engine Cylinders 12 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 5 valves 4 valves
Horse Power 560 HP 155 HP
Torque 612 Nm 200 Nm
Engine Bore Size 81.4 mm 84 mm
Engine Stroke Size 57.2 mm 90 mm
Engine Compression Ratio 7.5:1 12.0:1
Drive Type 4WD Rear
Transmission Type Manual Automatic
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 3 doors
Vehicle Weight 1618 kg 1385 kg
Vehicle Length 4400 mm 4250 mm
Vehicle Width 1940 mm 1430 mm
Vehicle Height 1120 mm 1750 mm
Wheelbase Size 2550 mm 2670 mm