1992 Bugatti EB 110 vs. 2010 Ford F-250

To start off, 2010 Ford F-250 is newer by 18 year(s). Which means there will be less support and parts availability for 1992 Bugatti EB 110. In addition, the cost of maintenance, including insurance, on 1992 Bugatti EB 110 would be higher. At 5,400 cc (8 cylinders), 2010 Ford F-250 is equipped with a bigger engine. In terms of performance, 1992 Bugatti EB 110 (650 HP @ 8000 RPM) has 350 more horse power than 2010 Ford F-250. (300 HP @ 5000 RPM). In normal driving conditions, 1992 Bugatti EB 110 should accelerate faster than 2010 Ford F-250. With that said, vehicle weight also plays an important factor in acceleration. 2010 Ford F-250 weights approximately 1383 kg more than 1992 Bugatti EB 110.

Because 1992 Bugatti EB 110 is four wheel drive (4WD), it will have significant more traction and grip than 2010 Ford F-250. In wet, icy, snow, or gravel driving conditions, 1992 Bugatti EB 110 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Bugatti EB 110 (637 Nm @ 3800 RPM) has 143 more torque (in Nm) than 2010 Ford F-250. (494 Nm @ 3750 RPM). This means 1992 Bugatti EB 110 will have an easier job in driving up hills or pulling heavy equipment than 2010 Ford F-250.

Compare all specifications:

1992 Bugatti EB 110 2010 Ford F-250
Make Bugatti Ford
Model EB 110 F-250
Year Released 1992 2010
Body Type Coupe Pickup
Engine Position Middle Front
Engine Size 3498 cc 5400 cc
Engine Cylinders 12 cylinders 8 cylinders
Engine Type V V
Horse Power 650 HP 300 HP
Engine RPM 8000 RPM 5000 RPM
Torque 637 Nm 494 Nm
Torque RPM 3800 RPM 3750 RPM
Drive Type 4WD Rear
Transmission Type Manual Manual
Vehicle Weight 1422 kg 2805 kg
Vehicle Length 4410 mm 6253 mm
Vehicle Width 1950 mm 2029 mm
Vehicle Height 1130 mm 1961 mm
Wheelbase Size 2560 mm 3967 mm
Fuel Tank Capacity 120 L 115 L