1992 Cadillac Seville vs. 1991 Mercedes-Benz 300
To start off, 1992 Cadillac Seville is newer by 1 year(s). Which means there will be less support and parts availability for 1991 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1991 Mercedes-Benz 300 would be higher. At 4,915 cc (8 cylinders), 1992 Cadillac Seville is equipped with a bigger engine. In terms of performance, 1991 Mercedes-Benz 300 (231 HP @ 5800 RPM) has 34 more horse power than 1992 Cadillac Seville. (197 HP @ 4100 RPM) In normal driving conditions, 1991 Mercedes-Benz 300 should accelerate faster than 1992 Cadillac Seville. With that said, vehicle weight also plays an important factor in acceleration. 1991 Mercedes-Benz 300 weights approximately 304 kg more than 1992 Cadillac Seville. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1991 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1991 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 1992 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Cadillac Seville (372 Nm @ 3000 RPM) has 62 more torque (in Nm) than 1991 Mercedes-Benz 300. (310 Nm @ 4100 RPM). This means 1992 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1991 Mercedes-Benz 300. 1992 Cadillac Seville has automatic transmission and 1991 Mercedes-Benz 300 has manual transmission. 1991 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1992 Cadillac Seville | 1991 Mercedes-Benz 300 | |
| Make | Cadillac | Mercedes-Benz |
| Model | Seville | 300 |
| Year Released | 1992 | 1991 |
| Engine Position | Front | Front |
| Engine Size | 4915 cc | 3198 cc |
| Engine Cylinders | 8 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 197 HP | 231 HP |
| Engine RPM | 4100 RPM | 5800 RPM |
| Torque | 372 Nm | 310 Nm |
| Torque RPM | 3000 RPM | 4100 RPM |
| Engine Bore Size | 92 mm | 89.9 mm |
| Engine Stroke Size | 92 mm | 84 mm |
| Engine Compression Ratio | 9.5:1 | 10.0:1 |
| Top Speed | 193 km/hour | 230 km/hour |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 1596 kg | 1900 kg |
| Vehicle Length | 5320 mm | 5110 mm |
| Vehicle Width | 1890 mm | 1890 mm |
| Vehicle Height | 1380 mm | 1500 mm |
| Wheelbase Size | 2860 mm | 3050 mm |
| Fuel Tank Capacity | 100 L | 100 L |
