1992 Chrysler ES vs. 2013 Mazda 3

To start off, 2013 Mazda 3 is newer by 21 year(s). Which means there will be less support and parts availability for 1992 Chrysler ES. In addition, the cost of maintenance, including insurance, on 1992 Chrysler ES would be higher. At 2,489 cc (4 cylinders), 2013 Mazda 3 is equipped with a bigger engine. In terms of performance, 2013 Mazda 3 (165 HP @ 6000 RPM) has 71 more horse power than 1992 Chrysler ES. (94 HP @ 4800 RPM) In normal driving conditions, 2013 Mazda 3 should accelerate faster than 1992 Chrysler ES. With that said, vehicle weight also plays an important factor in acceleration. 2013 Mazda 3 weights approximately 238 kg more than 1992 Chrysler ES. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Mazda 3 (228 Nm @ 4000 RPM) has 62 more torque (in Nm) than 1992 Chrysler ES. (166 Nm @ 3200 RPM). This means 2013 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1992 Chrysler ES.

Compare all specifications:

1992 Chrysler ES 2013 Mazda 3
Make Chrysler Mazda
Model ES 3
Year Released 1992 2013
Engine Position Front Front
Engine Size 2213 cc 2489 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 94 HP 165 HP
Engine RPM 4800 RPM 6000 RPM
Torque 166 Nm 228 Nm
Torque RPM 3200 RPM 4000 RPM
Engine Bore Size 87.5 mm 89 mm
Engine Stroke Size 92 mm 100 mm
Engine Compression Ratio 8.1:1 9.7:1
Fuel Type Gasoline Gasoline
Drive Type Front Front
Number of Seats 4 seats 5 seats
Vehicle Weight 1145 kg 1383 kg
Vehicle Length 4370 mm 4595 mm
Vehicle Width 1720 mm 1755 mm
Vehicle Height 1350 mm 1470 mm
Wheelbase Size 2470 mm 2640 mm