1992 Chrysler Viper vs. 2008 Toyota Sequoia
To start off, 2008 Toyota Sequoia is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Chrysler Viper. In addition, the cost of maintenance, including insurance, on 1992 Chrysler Viper would be higher. At 7,986 cc (10 cylinders), 1992 Chrysler Viper is equipped with a bigger engine. In terms of performance, 1992 Chrysler Viper (389 HP @ 5150 RPM) has 8 more horse power than 2008 Toyota Sequoia. (381 HP @ 5600 RPM). In normal driving conditions, 1992 Chrysler Viper should accelerate faster than 2008 Toyota Sequoia. With that said, vehicle weight also plays an important factor in acceleration. 1992 Chrysler Viper weights approximately 260 kg more than 2008 Toyota Sequoia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1992 Chrysler Viper is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 Chrysler Viper. However, in wet, icy, snow, or gravel driving conditions, 2008 Toyota Sequoia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Chrysler Viper (620 Nm @ 3600 RPM) has 76 more torque (in Nm) than 2008 Toyota Sequoia. (544 Nm @ 3600 RPM). This means 1992 Chrysler Viper will have an easier job in driving up hills or pulling heavy equipment than 2008 Toyota Sequoia. 2008 Toyota Sequoia has automatic transmission and 1992 Chrysler Viper has manual transmission. 1992 Chrysler Viper will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Toyota Sequoia will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1992 Chrysler Viper | 2008 Toyota Sequoia | |
| Make | Chrysler | Toyota |
| Model | Viper | Sequoia |
| Year Released | 1992 | 2008 |
| Body Type | Roadster | SUV |
| Engine Position | Front | Front |
| Engine Size | 7986 cc | 5663 cc |
| Engine Cylinders | 10 cylinders | 8 cylinders |
| Engine Type | V | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 389 HP | 381 HP |
| Engine RPM | 5150 RPM | 5600 RPM |
| Torque | 620 Nm | 544 Nm |
| Torque RPM | 3600 RPM | 3600 RPM |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 7 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1590 kg | 1330 kg |
| Vehicle Length | 4460 mm | 5220 mm |
| Vehicle Width | 1930 mm | 2040 mm |
| Vehicle Height | 1130 mm | 1920 mm |
| Wheelbase Size | 2450 mm | 3110 mm |
