1992 Daihatsu Opti vs. 2010 Toyota Tacoma

To start off, 2010 Toyota Tacoma is newer by 18 year(s). Which means there will be less support and parts availability for 1992 Daihatsu Opti. In addition, the cost of maintenance, including insurance, on 1992 Daihatsu Opti would be higher. At 2,694 cc (4 cylinders), 2010 Toyota Tacoma is equipped with a bigger engine. In terms of performance, 2010 Toyota Tacoma (160 HP @ 5200 RPM) has 104 more horse power than 1992 Daihatsu Opti. (56 HP @ 7600 RPM) In normal driving conditions, 2010 Toyota Tacoma should accelerate faster than 1992 Daihatsu Opti. With that said, vehicle weight also plays an important factor in acceleration. 2010 Toyota Tacoma weights approximately 570 kg more than 1992 Daihatsu Opti. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Toyota Tacoma is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Toyota Tacoma. However, in wet, icy, snow, or gravel driving conditions, 1992 Daihatsu Opti, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Toyota Tacoma (244 Nm @ 3800 RPM) has 180 more torque (in Nm) than 1992 Daihatsu Opti. (64 Nm @ 4000 RPM). This means 2010 Toyota Tacoma will have an easier job in driving up hills or pulling heavy equipment than 1992 Daihatsu Opti. 1992 Daihatsu Opti has automatic transmission and 2010 Toyota Tacoma has manual transmission. 2010 Toyota Tacoma will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Daihatsu Opti will be easier to drive especially in heavy traffic.

Compare all specifications:

1992 Daihatsu Opti 2010 Toyota Tacoma
Make Daihatsu Toyota
Model Opti Tacoma
Year Released 1992 2010
Engine Position Front Front
Engine Size 659 cc 2694 cc
Engine Cylinders 3 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 56 HP 160 HP
Engine RPM 7600 RPM 5200 RPM
Torque 64 Nm 244 Nm
Torque RPM 4000 RPM 3800 RPM
Engine Compression Ratio 10.5:1 10.0:1
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 4 seats 3 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 760 kg 1330 kg
Vehicle Length 3400 mm 4840 mm
Vehicle Width 1480 mm 1900 mm
Vehicle Height 1410 mm 1780 mm
Wheelbase Size 2370 mm 2790 mm
Fuel Tank Capacity 40 L 79 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]