1992 Ford Crown Victoria vs. 2011 Seat Altea
To start off, 2011 Seat Altea is newer by 19 year(s). Which means there will be less support and parts availability for 1992 Ford Crown Victoria. In addition, the cost of maintenance, including insurance, on 1992 Ford Crown Victoria would be higher. At 4,598 cc (8 cylinders), 1992 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 1992 Ford Crown Victoria (208 HP @ 4600 RPM) has 70 more horse power than 2011 Seat Altea. (138 HP @ 4000 RPM). In normal driving conditions, 1992 Ford Crown Victoria should accelerate faster than 2011 Seat Altea. With that said, vehicle weight also plays an important factor in acceleration. 1992 Ford Crown Victoria weights approximately 521 kg more than 2011 Seat Altea. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1992 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2011 Seat Altea, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Ford Crown Victoria (386 Nm @ 3000 RPM) has 66 more torque (in Nm) than 2011 Seat Altea. (320 Nm @ 2500 RPM). This means 1992 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2011 Seat Altea. 1992 Ford Crown Victoria has automatic transmission and 2011 Seat Altea has manual transmission. 2011 Seat Altea will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
1992 Ford Crown Victoria | 2011 Seat Altea | |
Make | Ford | Seat |
Model | Crown Victoria | Altea |
Year Released | 1992 | 2011 |
Body Type | Sedan | Minivan |
Engine Position | Front | Front |
Engine Size | 4598 cc | 1968 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 208 HP | 138 HP |
Engine RPM | 4600 RPM | 4000 RPM |
Torque | 386 Nm | 320 Nm |
Torque RPM | 3000 RPM | 2500 RPM |
Engine Bore Size | 90.2 mm | 81 mm |
Engine Stroke Size | 90 mm | 95.5 mm |
Engine Compression Ratio | 9.0:1 | 18.5:1 |
Fuel Type | Gasoline | Diesel |
Top Speed | 201 km/hour | 201 km/hour |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1715 kg | 1194 kg |
Vehicle Length | 5400 mm | 4290 mm |
Vehicle Width | 1980 mm | 1770 mm |
Vehicle Height | 1450 mm | 1570 mm |
Wheelbase Size | 2910 mm | 2470 mm |
Fuel Tank Capacity | 62 L | 55 L |