1992 Holden Apollo vs. 1992 Honda Prelude
To start off, both 1992 Holden Apollo and 1992 Honda Prelude were released in the same year (1992). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,257 cc (4 cylinders), 1992 Honda Prelude is equipped with a bigger engine. In terms of performance, 1992 Honda Prelude (158 HP @ 5800 RPM) has 40 more horse power than 1992 Holden Apollo. (118 HP @ 5200 RPM) In normal driving conditions, 1992 Honda Prelude should accelerate faster than 1992 Holden Apollo. With that said, vehicle weight also plays an important factor in acceleration. 1992 Honda Prelude weights approximately 105 kg more than 1992 Holden Apollo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Honda Prelude (209 Nm @ 4500 RPM) has 37 more torque (in Nm) than 1992 Holden Apollo. (172 Nm @ 4400 RPM). This means 1992 Honda Prelude will have an easier job in driving up hills or pulling heavy equipment than 1992 Holden Apollo.
Compare all specifications:
1992 Holden Apollo | 1992 Honda Prelude | |
Make | Holden | Honda |
Model | Apollo | Prelude |
Year Released | 1992 | 1992 |
Engine Position | Front | Front |
Engine Size | 1998 cc | 2257 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 118 HP | 158 HP |
Engine RPM | 5200 RPM | 5800 RPM |
Torque | 172 Nm | 209 Nm |
Torque RPM | 4400 RPM | 4500 RPM |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1205 kg | 1310 kg |
Vehicle Length | 4510 mm | 4450 mm |
Vehicle Width | 1720 mm | 1770 mm |
Vehicle Height | 1410 mm | 1300 mm |
Wheelbase Size | 2610 mm | 2510 mm |