1992 Holden Statesman vs. 2008 Peugeot 1007
To start off, 2008 Peugeot 1007 is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1992 Holden Statesman would be higher. At 4,987 cc (8 cylinders), 1992 Holden Statesman is equipped with a bigger engine. In terms of performance, 1992 Holden Statesman (223 HP @ 4400 RPM) has 115 more horse power than 2008 Peugeot 1007. (108 HP @ 4000 RPM). In normal driving conditions, 1992 Holden Statesman should accelerate faster than 2008 Peugeot 1007. With that said, vehicle weight also plays an important factor in acceleration. 1992 Holden Statesman weights approximately 215 kg more than 2008 Peugeot 1007. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1992 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 2008 Peugeot 1007, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Holden Statesman (385 Nm @ 3600 RPM) has 145 more torque (in Nm) than 2008 Peugeot 1007. (240 Nm @ 1750 RPM). This means 1992 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 2008 Peugeot 1007. 1992 Holden Statesman has automatic transmission and 2008 Peugeot 1007 has manual transmission. 2008 Peugeot 1007 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
1992 Holden Statesman | 2008 Peugeot 1007 | |
Make | Holden | Peugeot |
Model | Statesman | 1007 |
Year Released | 1992 | 2008 |
Engine Position | Front | Front |
Engine Size | 4987 cc | 1560 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 223 HP | 108 HP |
Engine RPM | 4400 RPM | 4000 RPM |
Torque | 385 Nm | 240 Nm |
Torque RPM | 3600 RPM | 1750 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1565 kg | 1350 kg |
Vehicle Length | 4970 mm | 3740 mm |
Vehicle Width | 1820 mm | 1710 mm |
Vehicle Height | 1430 mm | 1630 mm |
Wheelbase Size | 2830 mm | 2320 mm |