1992 Honda Integra vs. 2011 Ford Crown Victoria
To start off, 2011 Ford Crown Victoria is newer by 19 year(s). Which means there will be less support and parts availability for 1992 Honda Integra. In addition, the cost of maintenance, including insurance, on 1992 Honda Integra would be higher. At 4,604 cc (8 cylinders), 2011 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2011 Ford Crown Victoria (239 HP @ 4750 RPM) has 133 more horse power than 1992 Honda Integra. (106 HP @ 6300 RPM) In normal driving conditions, 2011 Ford Crown Victoria should accelerate faster than 1992 Honda Integra. With that said, vehicle weight also plays an important factor in acceleration. 2011 Ford Crown Victoria weights approximately 1846 kg more than 1992 Honda Integra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2011 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2011 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1992 Honda Integra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 Ford Crown Victoria (374 Nm @ 4000 RPM) has 240 more torque (in Nm) than 1992 Honda Integra. (134 Nm @ 4500 RPM). This means 2011 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1992 Honda Integra. 2011 Ford Crown Victoria has automatic transmission and 1992 Honda Integra has manual transmission. 1992 Honda Integra will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
1992 Honda Integra | 2011 Ford Crown Victoria | |
Make | Honda | Ford |
Model | Integra | Crown Victoria |
Year Released | 1992 | 2011 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 1588 cc | 4604 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 106 HP | 239 HP |
Engine RPM | 6300 RPM | 4750 RPM |
Torque | 134 Nm | 374 Nm |
Torque RPM | 4500 RPM | 4000 RPM |
Engine Bore Size | 81 mm | 90.2 mm |
Engine Stroke Size | 77.4 mm | 90 mm |
Engine Compression Ratio | 9.0:1 | 9.4:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1010 kg | 2856 kg |
Vehicle Length | 4400 mm | 5390 mm |
Vehicle Width | 1700 mm | 1970 mm |
Vehicle Height | 1330 mm | 1450 mm |
Wheelbase Size | 2560 mm | 2920 mm |