1992 Italdesign Columbus vs. 1970 Toyota Corolla
To start off, 1992 Italdesign Columbus is newer by 22 year(s). Which means there will be less support and parts availability for 1970 Toyota Corolla. In addition, the cost of maintenance, including insurance, on 1970 Toyota Corolla would be higher. At 4,988 cc (12 cylinders), 1992 Italdesign Columbus is equipped with a bigger engine. In terms of performance, 1992 Italdesign Columbus (295 HP) has 222 more horse power than 1970 Toyota Corolla. (73 HP). In normal driving conditions, 1992 Italdesign Columbus should accelerate faster than 1970 Toyota Corolla.
Because 1992 Italdesign Columbus is four wheel drive (4WD), it will have significant more traction and grip than 1970 Toyota Corolla. In wet, icy, snow, or gravel driving conditions, 1992 Italdesign Columbus will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Italdesign Columbus (450 Nm) has 356 more torque (in Nm) than 1970 Toyota Corolla. (94 Nm). This means 1992 Italdesign Columbus will have an easier job in driving up hills or pulling heavy equipment than 1970 Toyota Corolla. 1992 Italdesign Columbus has automatic transmission and 1970 Toyota Corolla has manual transmission. 1970 Toyota Corolla will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Italdesign Columbus will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1992 Italdesign Columbus | 1970 Toyota Corolla | |
| Make | Italdesign | Toyota |
| Model | Columbus | Corolla |
| Year Released | 1992 | 1970 |
| Engine Position | Middle | Front |
| Engine Size | 4988 cc | 1166 cc |
| Engine Cylinders | 12 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 295 HP | 73 HP |
| Torque | 450 Nm | 94 Nm |
| Engine Bore Size | 84.1 mm | 75 mm |
| Engine Stroke Size | 74.9 mm | 66 mm |
| Engine Compression Ratio | 8.8:1 | 10.0:1 |
| Drive Type | 4WD | Rear |
| Transmission Type | Automatic | Manual |
| Vehicle Length | 6000 mm | 3950 mm |
| Vehicle Width | 2200 mm | 1510 mm |
| Vehicle Height | 2200 mm | 1380 mm |
| Wheelbase Size | 3830 mm | 2340 mm |
