1993 Alpina B3 vs. 2010 BMW 120

To start off, 2010 BMW 120 is newer by 17 year(s). Which means there will be less support and parts availability for 1993 Alpina B3. In addition, the cost of maintenance, including insurance, on 1993 Alpina B3 would be higher. At 2,495 cc (6 cylinders), 1993 Alpina B3 is equipped with a bigger engine. In terms of performance, 1993 Alpina B3 (250 HP @ 4800 RPM) has 82 more horse power than 2010 BMW 120. (168 HP @ 6700 RPM). In normal driving conditions, 1993 Alpina B3 should accelerate faster than 2010 BMW 120. With that said, vehicle weight also plays an important factor in acceleration. 1993 Alpina B3 weights approximately 315 kg more than 2010 BMW 120. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 BMW 120 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 BMW 120. However, in wet, icy, snow, or gravel driving conditions, 1993 Alpina B3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Alpina B3 (260 Nm) has 50 more torque (in Nm) than 2010 BMW 120. (210 Nm). This means 1993 Alpina B3 will have an easier job in driving up hills or pulling heavy equipment than 2010 BMW 120. 2010 BMW 120 has automatic transmission and 1993 Alpina B3 has manual transmission. 1993 Alpina B3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 BMW 120 will be easier to drive especially in heavy traffic.

Compare all specifications: