1993 Alpina B6 vs. 1990 Beijing BJ 212
To start off, 1993 Alpina B6 is newer by 3 year(s). Which means there will be less support and parts availability for 1990 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1990 Beijing BJ 212 would be higher. At 2,752 cc (6 cylinders), 1993 Alpina B6 is equipped with a bigger engine. In terms of performance, 1993 Alpina B6 (238 HP @ 5900 RPM) has 151 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM). In normal driving conditions, 1993 Alpina B6 should accelerate faster than 1990 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1990 Beijing BJ 212 weights approximately 205 kg more than 1993 Alpina B6.
Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1993 Alpina B6. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Alpina B6 (293 Nm @ 4700 RPM) has 112 more torque (in Nm) than 1990 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 1993 Alpina B6 will have an easier job in driving up hills or pulling heavy equipment than 1990 Beijing BJ 212.
Compare all specifications:
1993 Alpina B6 | 1990 Beijing BJ 212 | |
Make | Alpina | Beijing |
Model | B6 | BJ 212 |
Year Released | 1993 | 1990 |
Engine Size | 2752 cc | 2066 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 238 HP | 87 HP |
Engine RPM | 5900 RPM | 4250 RPM |
Torque | 293 Nm | 181 Nm |
Torque RPM | 4700 RPM | 2000 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 1325 kg | 1530 kg |
Vehicle Length | 4440 mm | 3910 mm |
Vehicle Width | 1710 mm | 1760 mm |
Vehicle Height | 1400 mm | 1880 mm |
Wheelbase Size | 2710 mm | 2310 mm |