1993 Alpine A 610 vs. 1989 Oldsmobile Cutlass

To start off, 1993 Alpine A 610 is newer by 4 year(s). Which means there will be less support and parts availability for 1989 Oldsmobile Cutlass. In addition, the cost of maintenance, including insurance, on 1989 Oldsmobile Cutlass would be higher. At 2,975 cc (6 cylinders), 1993 Alpine A 610 is equipped with a bigger engine. In terms of performance, 1993 Alpine A 610 (247 HP @ 5750 RPM) has 83 more horse power than 1989 Oldsmobile Cutlass. (164 HP @ 5600 RPM). In normal driving conditions, 1993 Alpine A 610 should accelerate faster than 1989 Oldsmobile Cutlass. With that said, vehicle weight also plays an important factor in acceleration. 1993 Alpine A 610 weights approximately 214 kg more than 1989 Oldsmobile Cutlass. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1993 Alpine A 610 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1993 Alpine A 610. However, in wet, icy, snow, or gravel driving conditions, 1989 Oldsmobile Cutlass, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Alpine A 610 (357 Nm @ 2900 RPM) has 120 more torque (in Nm) than 1989 Oldsmobile Cutlass. (237 Nm @ 4000 RPM). This means 1993 Alpine A 610 will have an easier job in driving up hills or pulling heavy equipment than 1989 Oldsmobile Cutlass. 1989 Oldsmobile Cutlass has automatic transmission and 1993 Alpine A 610 has manual transmission. 1993 Alpine A 610 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1989 Oldsmobile Cutlass will be easier to drive especially in heavy traffic.

Compare all specifications: