1993 Alpine A 610 vs. 2010 Jeep Wrangler
To start off, 2010 Jeep Wrangler is newer by 17 year(s). Which means there will be less support and parts availability for 1993 Alpine A 610. In addition, the cost of maintenance, including insurance, on 1993 Alpine A 610 would be higher. At 3,800 cc (6 cylinders), 2010 Jeep Wrangler is equipped with a bigger engine. In terms of performance, 1993 Alpine A 610 (247 HP @ 5750 RPM) has 42 more horse power than 2010 Jeep Wrangler. (205 HP @ 5200 RPM). In normal driving conditions, 1993 Alpine A 610 should accelerate faster than 2010 Jeep Wrangler. With that said, vehicle weight also plays an important factor in acceleration. 2010 Jeep Wrangler weights approximately 437 kg more than 1993 Alpine A 610.
Because 2010 Jeep Wrangler is four wheel drive (4WD), it will have significant more traction and grip than 1993 Alpine A 610. In wet, icy, snow, or gravel driving conditions, 2010 Jeep Wrangler will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Alpine A 610 (357 Nm @ 2900 RPM) has 32 more torque (in Nm) than 2010 Jeep Wrangler. (325 Nm @ 4000 RPM). This means 1993 Alpine A 610 will have an easier job in driving up hills or pulling heavy equipment than 2010 Jeep Wrangler.
Compare all specifications:
1993 Alpine A 610 | 2010 Jeep Wrangler | |
Make | Alpine | Jeep |
Model | A 610 | Wrangler |
Year Released | 1993 | 2010 |
Engine Size | 2975 cc | 3800 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | V | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 247 HP | 205 HP |
Engine RPM | 5750 RPM | 5200 RPM |
Torque | 357 Nm | 325 Nm |
Torque RPM | 2900 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 1414 kg | 1851 kg |
Vehicle Length | 4430 mm | 4161 mm |
Vehicle Width | 1780 mm | 2103 mm |