1993 Audi S2 vs. 1957 Austin A135

To start off, 1993 Audi S2 is newer by 36 year(s). Which means there will be less support and parts availability for 1957 Austin A135. In addition, the cost of maintenance, including insurance, on 1957 Austin A135 would be higher. At 3,993 cc (6 cylinders), 1957 Austin A135 is equipped with a bigger engine. In terms of performance, 1993 Audi S2 (227 HP @ 5900 RPM) has 79 more horse power than 1957 Austin A135. (148 HP @ 4100 RPM). In normal driving conditions, 1993 Audi S2 should accelerate faster than 1957 Austin A135. With that said, vehicle weight also plays an important factor in acceleration. 1957 Austin A135 weights approximately 607 kg more than 1993 Audi S2.

Because 1993 Audi S2 is four wheel drive (4WD), it will have significant more traction and grip than 1957 Austin A135. In wet, icy, snow, or gravel driving conditions, 1993 Audi S2 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Audi S2 (350 Nm @ 1950 RPM) has 42 more torque (in Nm) than 1957 Austin A135. (308 Nm @ 2400 RPM). This means 1993 Audi S2 will have an easier job in driving up hills or pulling heavy equipment than 1957 Austin A135.

Compare all specifications:

1993 Audi S2 1957 Austin A135
Make Audi Austin
Model S2 A135
Year Released 1993 1957
Engine Position Front Front
Engine Size 2226 cc 3993 cc
Engine Cylinders 5 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 227 HP 148 HP
Engine RPM 5900 RPM 4100 RPM
Torque 350 Nm 308 Nm
Torque RPM 1950 RPM 2400 RPM
Engine Bore Size 81 mm 87.3 mm
Engine Stroke Size 86.4 mm 111.1 mm
Engine Compression Ratio 9.3:1 7.6:1
Drive Type 4WD Rear
Transmission Type Manual Manual
Number of Doors 2 doors 4 doors
Vehicle Weight 1473 kg 2080 kg
Vehicle Length 4410 mm 5110 mm
Vehicle Width 1720 mm 1860 mm
Vehicle Height 1380 mm 1680 mm
Wheelbase Size 2560 mm 3100 mm
Fuel Tank Capacity 70 L 34 L