1993 Beijing BJ 212 vs. 1958 Jeep CJ
To start off, 1993 Beijing BJ 212 is newer by 35 year(s). Which means there will be less support and parts availability for 1958 Jeep CJ. In addition, the cost of maintenance, including insurance, on 1958 Jeep CJ would be higher. At 3,687 cc (6 cylinders), 1958 Jeep CJ is equipped with a bigger engine. In terms of performance, 1958 Jeep CJ (135 HP @ 4200 RPM) has 48 more horse power than 1993 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1958 Jeep CJ should accelerate faster than 1993 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1993 Beijing BJ 212 weights approximately 350 kg more than 1958 Jeep CJ.
Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 Jeep CJ (326 Nm @ 2400 RPM) has 145 more torque (in Nm) than 1993 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 1958 Jeep CJ will have an easier job in driving up hills or pulling heavy equipment than 1993 Beijing BJ 212.
Compare all specifications:
1993 Beijing BJ 212 | 1958 Jeep CJ | |
Make | Beijing | Jeep |
Model | BJ 212 | CJ |
Year Released | 1993 | 1958 |
Engine Size | 2068 cc | 3687 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 87 HP | 135 HP |
Engine RPM | 4250 RPM | 4200 RPM |
Torque | 181 Nm | 326 Nm |
Torque RPM | 2000 RPM | 2400 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 1180 kg |
Vehicle Length | 3910 mm | 3520 mm |
Vehicle Width | 1760 mm | 1550 mm |
Vehicle Height | 1880 mm | 1740 mm |
Wheelbase Size | 2310 mm | 2060 mm |