1993 Beijing BJ 212 vs. 1968 Isuzu 117
To start off, 1993 Beijing BJ 212 is newer by 25 year(s). Which means there will be less support and parts availability for 1968 Isuzu 117. In addition, the cost of maintenance, including insurance, on 1968 Isuzu 117 would be higher. At 2,068 cc (4 cylinders), 1993 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, 1968 Isuzu 117 (118 HP @ 6400 RPM) has 31 more horse power than 1993 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1968 Isuzu 117 should accelerate faster than 1993 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1993 Beijing BJ 212 weights approximately 480 kg more than 1968 Isuzu 117.
Because 1993 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1968 Isuzu 117. In wet, icy, snow, or gravel driving conditions, 1993 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Beijing BJ 212 (181 Nm @ 2000 RPM) has 39 more torque (in Nm) than 1968 Isuzu 117. (142 Nm @ 5000 RPM). This means 1993 Beijing BJ 212 will have an easier job in driving up hills or pulling heavy equipment than 1968 Isuzu 117.
Compare all specifications:
1993 Beijing BJ 212 | 1968 Isuzu 117 | |
Make | Beijing | Isuzu |
Model | BJ 212 | 117 |
Year Released | 1993 | 1968 |
Engine Size | 2068 cc | 1584 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 118 HP |
Engine RPM | 4250 RPM | 6400 RPM |
Torque | 181 Nm | 142 Nm |
Torque RPM | 2000 RPM | 5000 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 1050 kg |
Vehicle Length | 3910 mm | 4250 mm |
Vehicle Width | 1760 mm | 1610 mm |
Vehicle Height | 1880 mm | 1330 mm |
Wheelbase Size | 2310 mm | 2510 mm |