1993 Beijing BJ 212 vs. 1978 Porsche 930
To start off, 1993 Beijing BJ 212 is newer by 15 year(s). Which means there will be less support and parts availability for 1978 Porsche 930. In addition, the cost of maintenance, including insurance, on 1978 Porsche 930 would be higher. At 3,299 cc (6 cylinders), 1978 Porsche 930 is equipped with a bigger engine. In terms of performance, 1978 Porsche 930 (296 HP @ 5500 RPM) has 209 more horse power than 1993 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1978 Porsche 930 should accelerate faster than 1993 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1993 Beijing BJ 212 weights approximately 230 kg more than 1978 Porsche 930.
Because 1993 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1978 Porsche 930. In wet, icy, snow, or gravel driving conditions, 1993 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 Porsche 930 (431 Nm @ 4000 RPM) has 250 more torque (in Nm) than 1993 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 1978 Porsche 930 will have an easier job in driving up hills or pulling heavy equipment than 1993 Beijing BJ 212.
Compare all specifications:
1993 Beijing BJ 212 | 1978 Porsche 930 | |
Make | Beijing | Porsche |
Model | BJ 212 | 930 |
Year Released | 1993 | 1978 |
Engine Size | 2068 cc | 3299 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | boxer |
Horse Power | 87 HP | 296 HP |
Engine RPM | 4250 RPM | 5500 RPM |
Torque | 181 Nm | 431 Nm |
Torque RPM | 2000 RPM | 4000 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 1300 kg |
Vehicle Length | 3910 mm | 4300 mm |
Vehicle Width | 1760 mm | 1780 mm |
Vehicle Height | 1880 mm | 1320 mm |
Wheelbase Size | 2310 mm | 2510 mm |