1993 Beijing BJ 212 vs. 1986 BMW 325
To start off, 1993 Beijing BJ 212 is newer by 7 year(s). Which means there will be less support and parts availability for 1986 BMW 325. In addition, the cost of maintenance, including insurance, on 1986 BMW 325 would be higher. At 2,493 cc (6 cylinders), 1986 BMW 325 is equipped with a bigger engine. In terms of performance, 1986 BMW 325 (171 HP @ 5800 RPM) has 84 more horse power than 1993 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1986 BMW 325 should accelerate faster than 1993 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1993 Beijing BJ 212 weights approximately 275 kg more than 1986 BMW 325.
Because 1993 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1986 BMW 325. In wet, icy, snow, or gravel driving conditions, 1993 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 BMW 325 (226 Nm @ 4000 RPM) has 45 more torque (in Nm) than 1993 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 1986 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 1993 Beijing BJ 212.
Compare all specifications:
1993 Beijing BJ 212 | 1986 BMW 325 | |
Make | Beijing | BMW |
Model | BJ 212 | 325 |
Year Released | 1993 | 1986 |
Engine Size | 2068 cc | 2493 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 171 HP |
Engine RPM | 4250 RPM | 5800 RPM |
Torque | 181 Nm | 226 Nm |
Torque RPM | 2000 RPM | 4000 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 1255 kg |
Vehicle Length | 3910 mm | 4330 mm |
Vehicle Width | 1760 mm | 1650 mm |
Vehicle Height | 1880 mm | 1390 mm |
Wheelbase Size | 2310 mm | 2630 mm |