1993 Beijing BJ 212 vs. 1988 Morgan 4

To start off, 1993 Beijing BJ 212 is newer by 5 year(s). Which means there will be less support and parts availability for 1988 Morgan 4. In addition, the cost of maintenance, including insurance, on 1988 Morgan 4 would be higher. At 2,068 cc (4 cylinders), 1993 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, 1988 Morgan 4 (96 HP @ 6000 RPM) has 9 more horse power than 1993 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1988 Morgan 4 should accelerate faster than 1993 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1993 Beijing BJ 212 weights approximately 705 kg more than 1988 Morgan 4.

Because 1993 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1988 Morgan 4. In wet, icy, snow, or gravel driving conditions, 1993 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Beijing BJ 212 (181 Nm @ 2000 RPM) has 49 more torque (in Nm) than 1988 Morgan 4. (132 Nm @ 4000 RPM). This means 1993 Beijing BJ 212 will have an easier job in driving up hills or pulling heavy equipment than 1988 Morgan 4.

Compare all specifications:

1993 Beijing BJ 212 1988 Morgan 4
Make Beijing Morgan
Model BJ 212 4
Year Released 1993 1988
Engine Size 2068 cc 1597 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 87 HP 96 HP
Engine RPM 4250 RPM 6000 RPM
Torque 181 Nm 132 Nm
Torque RPM 2000 RPM 4000 RPM
Fuel Type Diesel Gasoline
Drive Type 4WD Rear
Transmission Type Manual Manual
Vehicle Weight 1530 kg 825 kg
Vehicle Length 3910 mm 3670 mm
Vehicle Width 1760 mm 1430 mm
Vehicle Height 1880 mm 1300 mm
Wheelbase Size 2310 mm 2450 mm