1993 BMW 856 vs. 1975 Mercedes-Benz 200

To start off, 1993 BMW 856 is newer by 18 year(s). Which means there will be less support and parts availability for 1975 Mercedes-Benz 200. In addition, the cost of maintenance, including insurance, on 1975 Mercedes-Benz 200 would be higher. At 5,576 cc (12 cylinders), 1993 BMW 856 is equipped with a bigger engine. In terms of performance, 1993 BMW 856 (376 HP @ 5300 RPM) has 322 more horse power than 1975 Mercedes-Benz 200. (54 HP @ 4200 RPM). In normal driving conditions, 1993 BMW 856 should accelerate faster than 1975 Mercedes-Benz 200. With that said, vehicle weight also plays an important factor in acceleration. 1993 BMW 856 weights approximately 487 kg more than 1975 Mercedes-Benz 200. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 BMW 856 (550 Nm @ 4000 RPM) has 437 more torque (in Nm) than 1975 Mercedes-Benz 200. (113 Nm @ 2400 RPM). This means 1993 BMW 856 will have an easier job in driving up hills or pulling heavy equipment than 1975 Mercedes-Benz 200. 1975 Mercedes-Benz 200 has automatic transmission and 1993 BMW 856 has manual transmission. 1993 BMW 856 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1975 Mercedes-Benz 200 will be easier to drive especially in heavy traffic.

Compare all specifications:

1993 BMW 856 1975 Mercedes-Benz 200
Make BMW Mercedes-Benz
Model 856 200
Year Released 1993 1975
Engine Position Front Front
Engine Size 5576 cc 1988 cc
Engine Cylinders 12 cylinders 4 cylinders
Engine Type V in-line
Horse Power 376 HP 54 HP
Engine RPM 5300 RPM 4200 RPM
Torque 550 Nm 113 Nm
Torque RPM 4000 RPM 2400 RPM
Engine Bore Size 86 mm 87 mm
Engine Stroke Size 80 mm 83.6 mm
Engine Compression Ratio 9.8:1 21.5:1
Drive Type Rear Rear
Transmission Type Manual Automatic
Vehicle Weight 1865 kg 1378 kg
Vehicle Length 4790 mm 4730 mm
Vehicle Width 1860 mm 1790 mm
Vehicle Height 1350 mm 1450 mm
Wheelbase Size 2690 mm 2800 mm