1993 Bristol Blenheim vs. 2010 Ford Bantam
To start off, 2010 Ford Bantam is newer by 17 year(s). Which means there will be less support and parts availability for 1993 Bristol Blenheim. In addition, the cost of maintenance, including insurance, on 1993 Bristol Blenheim would be higher. At 5,898 cc (8 cylinders), 1993 Bristol Blenheim is equipped with a bigger engine. In terms of performance, 1993 Bristol Blenheim (228 HP) has 154 more horse power than 2010 Ford Bantam. (74 HP). In normal driving conditions, 1993 Bristol Blenheim should accelerate faster than 2010 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1993 Bristol Blenheim weights approximately 779 kg more than 2010 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1993 Bristol Blenheim is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1993 Bristol Blenheim. However, in wet, icy, snow, or gravel driving conditions, 2010 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Bristol Blenheim (440 Nm @ 3200 RPM) has 330 more torque (in Nm) than 2010 Ford Bantam. (110 Nm @ 3000 RPM). This means 1993 Bristol Blenheim will have an easier job in driving up hills or pulling heavy equipment than 2010 Ford Bantam. 1993 Bristol Blenheim has automatic transmission and 2010 Ford Bantam has manual transmission. 2010 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1993 Bristol Blenheim will be easier to drive especially in heavy traffic.
Compare all specifications:
1993 Bristol Blenheim | 2010 Ford Bantam | |
Make | Bristol | Ford |
Model | Blenheim | Bantam |
Year Released | 1993 | 2010 |
Engine Position | Front | Front |
Engine Size | 5898 cc | 1296 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 228 HP | 74 HP |
Torque | 440 Nm | 110 Nm |
Torque RPM | 3200 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1745 kg | 966 kg |
Vehicle Length | 4880 mm | 4280 mm |
Vehicle Width | 1760 mm | 1470 mm |
Vehicle Height | 1450 mm | 1640 mm |
Wheelbase Size | 2910 mm | 2670 mm |