1993 Cadillac Seville vs. 1957 Ford Consul
To start off, 1993 Cadillac Seville is newer by 36 year(s). Which means there will be less support and parts availability for 1957 Ford Consul. In addition, the cost of maintenance, including insurance, on 1957 Ford Consul would be higher. At 4,915 cc (8 cylinders), 1993 Cadillac Seville is equipped with a bigger engine. In terms of performance, 1993 Cadillac Seville (197 HP @ 4100 RPM) has 150 more horse power than 1957 Ford Consul. (47 HP @ 4400 RPM). In normal driving conditions, 1993 Cadillac Seville should accelerate faster than 1957 Ford Consul. With that said, vehicle weight also plays an important factor in acceleration. 1993 Cadillac Seville weights approximately 501 kg more than 1957 Ford Consul. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1957 Ford Consul is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Ford Consul. However, in wet, icy, snow, or gravel driving conditions, 1993 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Cadillac Seville (372 Nm @ 3000 RPM) has 248 more torque (in Nm) than 1957 Ford Consul. (124 Nm @ 2300 RPM). This means 1993 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1957 Ford Consul. 1993 Cadillac Seville has automatic transmission and 1957 Ford Consul has manual transmission. 1957 Ford Consul will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1993 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
1993 Cadillac Seville | 1957 Ford Consul | |
Make | Cadillac | Ford |
Model | Seville | Consul |
Year Released | 1993 | 1957 |
Engine Position | Front | Front |
Engine Size | 4915 cc | 1702 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 197 HP | 47 HP |
Engine RPM | 4100 RPM | 4400 RPM |
Torque | 372 Nm | 124 Nm |
Torque RPM | 3000 RPM | 2300 RPM |
Engine Bore Size | 92 mm | 82.6 mm |
Engine Stroke Size | 92 mm | 79.5 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1590 kg | 1089 kg |
Vehicle Length | 5190 mm | 4380 mm |
Vehicle Width | 1900 mm | 1750 mm |
Vehicle Height | 1380 mm | 1570 mm |
Wheelbase Size | 2830 mm | 2660 mm |
Fuel Tank Capacity | 100 L | 47 L |