1993 Chevrolet APV vs. 2006 Hummer H1

To start off, 2006 Hummer H1 is newer by 13 year(s). Which means there will be less support and parts availability for 1993 Chevrolet APV. In addition, the cost of maintenance, including insurance, on 1993 Chevrolet APV would be higher. At 6,604 cc (8 cylinders), 2006 Hummer H1 is equipped with a bigger engine. In terms of performance, 2006 Hummer H1 (300 HP) has 182 more horse power than 1993 Chevrolet APV. (118 HP) In normal driving conditions, 2006 Hummer H1 should accelerate faster than 1993 Chevrolet APV. With that said, vehicle weight also plays an important factor in acceleration. 2006 Hummer H1 weights approximately 1682 kg more than 1993 Chevrolet APV. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2006 Hummer H1 is four wheel drive (4WD), it will have significant more traction and grip than 1993 Chevrolet APV. In wet, icy, snow, or gravel driving conditions, 2006 Hummer H1 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Hummer H1 (705 Nm @ 1500 RPM) has 468 more torque (in Nm) than 1993 Chevrolet APV. (237 Nm @ 2200 RPM). This means 2006 Hummer H1 will have an easier job in driving up hills or pulling heavy equipment than 1993 Chevrolet APV.

Compare all specifications:

1993 Chevrolet APV 2006 Hummer H1
Make Chevrolet Hummer
Model APV H1
Year Released 1993 2006
Engine Position Front Front
Engine Size 3135 cc 6604 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Horse Power 118 HP 300 HP
Torque 237 Nm 705 Nm
Torque RPM 2200 RPM 1500 RPM
Engine Bore Size 90 mm 103.1 mm
Engine Stroke Size 83 mm 99.1 mm
Fuel Type Gasoline Diesel
Drive Type Front 4WD
Vehicle Weight 1590 kg 3272 kg
Vehicle Length 4930 mm 4690 mm
Vehicle Width 1890 mm 2200 mm
Vehicle Height 1670 mm 2010 mm
Wheelbase Size 2800 mm 3310 mm